Monarch 9403TM manual Printhead Platen Roller

5.Wind the supplies back onto the supply roll.

6.Remove the ribbon, if one is loaded. See Chapter 2, "Loading a Ribbon."

7.Moisten a cotton swab with isopropyl alcohol.

8.Rub the swab across the printhead and remove any build-up.

Printhead

Platen

Roller

9.Clean the platen roller with a dry cloth or small brush. However, if there is adhesive gum build-up on the platen roller, moisten a cotton swab with isopropyl alcohol. Run the cotton swab or dry cloth across the platen roller. Make sure the platen roller is clean all the way around.

10.Re-load the supply roll and ribbon, if necessary.

11.Turn the printhead lever clockwise to close the printhead.

12.Turn on printer.

If printing has not improved, call Technical Support.

Cleaning 9-3