Problem | Action |
|
|
Voids in printing. | Clean the printhead. |
| Wrong supply type. Change supply. |
| Ribbon loaded incorrectly. Reload ribbon. |
| Call Technical Support for printer adjustment. |
"Check ribbon" | Load a new ribbon. |
message appears. |
|
| Reload ribbon. |
"Out of Paper" | Replace the supply roll. Make sure supplies |
message appears. | are loaded correctly. |
D a t a E r r o r s
Errors 001 to 499 are Data Errors. A Data Error indicates that incorrect data was received from the host, causing the printer to ignore the entire print job. These errors occur because data in the batch, format, or graphic packet is invalid. Refer to the Packet Reference Manual or your System Administrator for more information. Correct the format packet and send the print job again.
Error Description/Action
Code
001 Format ID number must be 1 to 999.
002Name must be 1 to 8 characters inside quotes.
003Action must be A (add) or C (clear).
004Supply length is invalid.
005Supply width is invalid.
006Storage device must be R (volatile RAM).
007Unit of measure must be E (English), M (Metric), or G (Dots).
010 Field ID number is outside the range 0 to 999.
Troubleshooting 11 - 3
