4. Place the roll of supply on the supply holder. For labels, the
supply unrolls from the top or the bottom. For perforated
tags, make sure the supply unrolls from the bottom, because
tag rolls are wound face in.
Do not pick up the printer
by the supply holder.
5. Adjust the supply holder guides so the sides barely touch the
roll. Make sure the supply roll turns freely.
If you are using fan-fold supplies, place the supply stack
behind the printer, label side facing up.
6. Push down on the supply lever to unlock the supply guides.
Supply Holder
Guides
Loading Supplies 2-3
Rev. C 3/99