Monarch 9800 Series manual 4Loading Supplies

7.Lay the label strip across the supply guide so that a few inches extend past the front of the printer. Tuck the supply under the nibs and in between the die cut sensor.

For fan-fold supplies, lay the label strip over the supply holder and across the supply guide so that a few inches extend past the front of the printer. Tuck the supply under the nibs and in between the die cut sensor.

Die Cut

Sensor

Nibs

Supply Lever

8.Adjust the supply guides so they touch the supply. Push up on the supply lever to lock the supply guides into place.

9.Hold the printhead assembly by the printhead tab while pressing down on the printhead release.

2-4Loading Supplies Rev. C 3/99