Monarch 9800 Series manual Exit Cover

To clean the printhead, supply sensor, and platen roller:

1.Turn off the printer.

2.Open the cover and printhead assembly.

3.Remove the label roll and ribbon (when cleaning the printhead).

4.Press down on the exit cover tabs to open the exit cover on the front of the printer.

Exit Cover

5.Clean the platen roller with a dry cloth or small brush. However, if there is adhesive gum build-up on the platen roller, moisten a cotton swab with isopropyl alcohol. Turn the platen roller with your finger and run the cotton swab or dry cloth across it. Make sure the platen roller is clean all the way around.

Care and Maintenance 5-3