Monarch 9800 Series manual P p l i e s, B b o n Specification, O u t R i b b o n s

S u p p l i e s

For high temperature or high humidity environments, contact Monarch for supply recommendations. Non-indexed supply (continuous) does not have perforations or black marks and must be used in continuous mode. Use continuous supply with the optional tear bar.

Supply Types: Thermal Transfer or Direct

Supply Widths: 1.2 inches (31 mm) minimum 4.25 inches (108 mm) maximum

Supply Lengths: 1 inch (25 mm) minimum

12.0inches (305 mm) maximum for 9820 printer

16.0inches (406 mm) maximum for 9830 printer

R i b b o n S p e c i f i c a t i o n

Ribbon Storage: Do not leave ribbon in direct sunlight, high temperatures, or high humidity.

Ribbon Type: Standard or High Energy (only available on 9830 printer)

Ribbon Widths: 1.3 inches (33 mm), 1.6 inches (41 mm,)

2.16inches (55 mm), 3.15 inches (80 mm),

4.13inches (105 mm)

Ribbon Length: 23,600 inches (600 meters)

A b o u t R i b b o n s

The width of the ribbon must be greater than the supply width. Since some supplies are more abrasive to printheads than others, using a ribbon wider than your supply helps protect the printhead. Replacement printheads are expensive.

A-2Specifications & Accessories