High Energy Ribbon Limitations
When using the high energy ribbon option:
uUse a print speed of 2.5IPS (inches per second).
uPrinthead warranty is reduced to 100,000 inches.
uSerial bar codes cannot be printed.
uDo not use peel mode.
uNo more than 20% of the supply should have print (black
coverage).
CAUTION
The high energy ribbon may break or stick to the
supply when more than 20% of the supply
contains print.
uOnly white high energy supply should be used for bar code
printing.
uReverse fonts cannot be used.
uA non-printing area of at least .1 inch (2.54 mm) must exist on
the left and right edge of the ribbon.
uDo not print horizontal lines or bars.
uGraphics are limited.
Loading Ribbon 3-7