9.Align the ribbon and make sure it is straight and centered throughout the path.

10.Tape the ribbon to the take-up core. Do not tape the ribbon to the take-up reel.

Take-up Core

Take-up Reel

11.Rotate the take-up core until the MONARCH leader is past the printhead.

12.Remove any slack in the ribbon by turning the take-up reel clockwise.

13.Hold the printhead assembly by the printhead tab while pressing down on the printhead release.

Loading Ribbon 3-5

Page 29
Image 29
Monarch 9800 Series manual Take-up Core Take-up Reel