Monarch 9800 manual Loading Supplies

5.Adjust the supply holder guides so the sides barely touch the roll. Make sure the supply roll turns freely.

Supply Holder

Guides

If you are using fan-fold supplies, place the supply stack behind the printer, label side facing up.

6.Push down on the supply lever to unlock the supply guides.

7.Lay the label strip across the supply guide so that a few inches extend past the front of the printer. Tuck the supply under the nibs.

For fan-fold supplies, lay the label strip over the supply holder and across the supply guide so that a few inches extend past the front of the printer. Tuck the supply under the nibs on the supply guide.

Loading Supplies 2-3