224Bar code Intercharacter gap must be 0 to 99 in printer dots.
251Power up mode must be 0 (online) or 1 (offline).
252Language selection must be 0 (English).
253Batch separator code must be 0 (off) or 1 (on) in the system setup packet.
254Slash zero selection must be 0 (standard zero) or 1 (slash zero).
255Supply type must be 0 (black mark) or 1 (die cut).
256Ribbon selection must be 0 (direct) or 1 (transfer).
257Feed mode must be 0 (continuous) or 1 (on-demand).
258Supply position is outside the range.
259Contrast adjustment must be -390 to 156 dots.
260Print adjustment must be -99 to 99 dots.
261Margin adjustment must be -99 to 99 dots.
262Speed adjustment is invalid.
263Primary monetary symbol is invalid.
264Secondary symbol selection must be 0 (none) or 1 (print secondary sign).
265Monetary decimal places must be 0 to 3.
266Character string length in Packet E must be 5 (MPCL control characters) or 7 (ENQ/IMD command character).
267Baud rate selection must be 0 (1200), 1 (2400), 2 (4800), 3 (9600), 4 (19.2), or 5 (38.4).
268Word length selection must be 0 (7 bits) or 1 (8 bits).
Troubleshooting