Monarch 9800 manual 273Cut adjustment must be -300 to 300 dots, 286The buffer size is invalid

269Stop bits selection must be 0 (1 bit) or 1 (2 bits).

270Parity selection must be 0 (none), 1 (odd), or 2 (even).

271Flow control selection must be 0 (none), 1 (DTR/DSR), 2 (CTS/RTS), or 3 (XON/XOFF).

272Internal code page selection must be 0 (Internal), 1 (ANSI), 2 (DOS 437), or 3 (DOS 850).

273Cut adjustment must be -300to 300 dots.

282RS232 Trailer string is too long. Use a maximum of 3 characters.

283ENQ Trailer string is too long. Use a maximum of 3 characters.

284The buffer type must be T (transmit), R (receive), I (image), F (format, batch data, and graphics), D (downloadable fonts), or V (vector/scalable fonts).

285The storage device type must be N (non-volatile RAM) or R (volatile RAM).

286The buffer size is invalid.

287The printhead width is invalid.

290Action must be 0 (disable) or 1 (enable) for Backfeed Control.

291Dispense position must be 50 to 200 dots and/or the backfeed distance is greater than the dispense position.

292Backfeed distance must be 10 to 200 dots.

310Check digit scheme number must be 1 to 10.

311Modulus must be 2 to 11.

314Check digit algorithm must be D (sum of digits) or P (sum of products).

6-8Troubleshooting