Motion Computing C5 manual Using the Rfid reader, To use the Rfid reader

Using the RFID reader

You can use the built-in RFID reader to retrieve information from RFID tags. For more information about the RFID reader, see “RFID reader” on page 12.

To use the RFID reader

1.Hold the C5 by the handle with the right edge in front of you.

2.Aim the right edge of the C5 at the RFID tag. Ensure that the tag is 25–40 mm from the RFID antenna scan area.

RFID antenna scan area

RFID tag

25 – 40 mm

3.Press and release the RFID button on the top of the C5. The RFID light will come on to indicate that the unit is scanning.

The RFID light goes off and the unit beeps to indicate a successful scan. The Ascii and Hex data appears in the RFID Tag Data window.

Note: RFID tags are typically used with specialized applications.

Chapter 3 Using the Motion C5 25