Motorola 3397GP manual Set system ftp-server option off on, Set system log-size 10240

set system ftp-server option [ off on ]

Enables or disables a simple FTP server in the Gateway. If enabled, the Gateway will accept binary embedded software images (‘.bin’) files or command line configuration files.

	Supported FTP commands
MODE	(data transfer mode (only Streaming supported)
NOOP	(send back ok)
PORT	(specify client address:port for data)
QUIT	(quit)
STOR	(send file to FTP server)
SYST	(get system info about FTP server)
TYPE	(set data representation type, ASCII and IMAGE (BIN) only supported)
USER	(send username for authentication)

set system log-size [ 10240... 65536 ]

Specifies a size for the system log. The most recent entries are posted to the beginning of the log. When the log becomes full, the oldest entries are dropped. The default is 30000.

set system persistent-log [ off on ]

When set to on, causes the log information to be kept in flash memory.

set system idle-timeout { telnet [ 1...120 ] http [ 1... 120 ] }

Specifies a timeout period of inactivity for telnet or HTTP access to the Gateway, after which a user must re-login to the Gateway. Defaults are 5 minutes for HTTP and 15 minutes for telnet.

set system username { administrator name user name }

Specifies the usernames for the administrative user – the default is admin; and a non-administrative user – the default is user.

set system password { admin user }

Specifies the administrator or user password for a Motorola Netopia® Gateway. When you enter the set system password command, you are prompted to enter the old password (if any) and new password. You are prompted to repeat the new password to verify that you entered it correctly the first time. To prevent anyone from observing the password you enter, characters in the old and new pass- words are not displayed as you type them. For security, you cannot use the “step” method to set the system password.

A password can be as many as 32 characters. Passwords are case-sensitive.

Passwords go into effect immediately. You do not have to restart the Motorola Netopia® Gateway for the password to take effect. Assigning an administrator or user password to a Motorola Netopia® Gate- way does not affect communications through the device.

211