Motorola 3397GP manual 243, Parameter

VDSL Parameters Accepted Values

Parameter

psd-mask-level

pbo-k1_1 pbo-k1_2 pbo-k1_3 pbo-k2_1 pbo-k2_2 pbo-k2_3

line-type

us-max-inter-delay

ds-max-inter-delay

us-target-noise-margin

ds-target-noise-margin

min-noise-margin

	Accepted Values
0x00	-- default mask (old gains from before)
0x01	-- ANSI M1 CAB
0x02	-- ANSI M2 CAB
0x03	-- ETSI M1 CAB
0x04	-- ETSI M2 CAB
0x05	-- ITU-T Annex F (Japan)
0x06	- ANSI M1 Ex
0x07	- ANSI M2 Ex
0x08	-- ETSI M1 Ex
0x09	- ETSI M2 Ex

0x0A - RESERVED

0x0B - PSD_K (Korean M1 FTTCab -59dBm/Hz)

K1 and K2 parameters allow the user more flexibility in using Upstream Power Back-Off (UPBO) on CPE modem. Changing K1 and K2 values will affect the CPE TX PSD. Refer to VDSL standards for exact relation between K1, K2 parameters and TX PSD. There is an individual set of K1/K2 parameters associated with each upstream band in the PSD: Upstream Band 0 or Optional band, Upstream band 1, Upstream band 2 and Upstream Band 3. Setting all K2 parameters to 0 and all K1 to a high power level(ie low number) will essentially disable UPBO.

VDSL_AUTO_DETECT – (0x80)

VDSL – (0x81)

VDSL_ETSI – (0x82)

Maximum upstream interleave delay.

Provisioned in steps of 0.5 ms. User defined.

Maximum downstream interleave delay.

Provisioned in steps of 0.5 ms. User defined.

Range 0-31.0dB, increments of 0.5dB (e.g., 0 =

0dB, 1 = 0.5dB, ...)

Range 0-31.0dB, increments of 0.5dB (e.g., 0 =

0dB, 1 = 0.5dB, ...)

Range 0-31.0dB, increments of 0.5dB (e.g., 0 =

0dB, 1 = 0.5dB, ...)

243