Motorola 3397GP manual

The IP Subnets screen allows you to configure up to seven secondary subnets and their DHCP ranges, by entering IP address/subnet mask pairs:

☛Note:

You need not use this screen if you have only a single Ethernet IP subnet.

This screen displays seven rows of editable columns. All seven row labels are always visible, regard- less of the number of subnets configured.

❑To add an IP subnet, select one of the rows, and click the Edit button.

Check the Enabled checkbox and click the Submit but- ton.

The screen expands to allow you to enter subnet infor- mation.

If DHCP Server (see “DHCP Server” on page 68) is not enabled, the DHCP Start Address and DHCP End Address fields do not appear.

❑Enter the Router’s IP address on the subnet in the IP Address field and the subnet mask for the subnet in the Netmask field.

❑Enter the DHCP Start Address and End Address of the subnet range in their respective fields.

Ranges cannot overlap and there may be only one range per subnet.

❑Click the Submit button.

To delete a configured subnet, set both the IP address and subnet mask values to 0.0.0.0, either explicitly or by clearing each field and clicking the Submit button to commit the change.

☛NOTE:

All additional DHCP ranges use the global lease period value. See page 68.

69