Motorola 3397GP manual Set wireless mac-auth option on off, 222, Example 40bit key 02468ACE02

Administrator’s Handbook

set wireless network-id privacy encryption-key1-length {40/64bit, 128bit, 256bit}

set wireless network-id privacy encryption-key2-length {40/64bit, 128bit, 256bit}

set wireless network-id privacy encryption-key3-length {40/64bit, 128bit, 256bit}

set wireless network-id privacy encryption-key4-length {40/64bit, 128bit, 256bit}

Selects the length of each encryption key. 40bit encryption is equivalent to 64bit encryption. The longer the key, the stronger the encryption and the more difficult it is to break the encryption.

set wireless network-id privacy encryption-key1 { hexadecimal digits } set wireless network-id privacy encryption-key2 { hexadecimal digits } set wireless network-id privacy encryption-key3 { hexadecimal digits } set wireless network-id privacy encryption-key4 { hexadecimal digits }

The encryption keys. Enter keys using hexadecimal digits. For 40/64bit encryption, you need 10 digits; 26 digits for 128bit, and 58 digits for 256bit WEP. Valid hexadecimal characters are 0 – 9, a – f.

Example 40bit key: 02468ACE02.

Example 128bit key: 0123456789ABCDEF0123456789.

Example 256bit key: 592CA140F0A238B0C61AE162F592CA140F0A238B0C61AE162F21A09C.

You must set at least one of these keys, indicated by the default-keyid.

Wireless MAC Address Authorization Settings

set wireless mac-auth option { on off }

Enabling this feature limits the MAC addresses that are allowed to access the LAN as well as the WAN to specified MAC (hardware) addresses.

set wireless mac-auth wrlss-MAC-list mac-address MAC-address_string

Enters a new MAC address into the MAC address authorization table. The format for an Ethernet MAC address is six hexadecimal values between 00 and FF inclusive separated by colons or dashes [e.g., 00:00:C5:70:00:04).

set wireless mac-auth wrlss-MAC-list mac-address “MAC-address_string” allow-access { on off }

Designates whether the MAC address is enabled or not for wireless network access. Disabled MAC addresses cannot be used for access until enabled.

set wireless multi-ssid second-ssid-macauth { off on } set wireless multi-ssid third-ssid-macauth { off on } set wireless multi-ssid fourth-ssid-macauth { off on }

Enables or disables MAC authorization for the specified SSID.

222