Motorola 3397GP Set bridge concurrent-bridging-routing on off, Set bridge dhcp-filterset string

Administrator’s Handbook

set bridge concurrent-bridging-routing {on off }

Enables or disables Concurrent Bridging/Routing.

set bridge dhcp-filterset "string"

Assigns a filterset named string to the bridge configuration.

☛NOTE:

A filterset can only be configured for the bridge if the system bridge or concurrent bridging/ routing is enabled.

set bridge ethernet option { on off }

Enables or disables bridging services for the specified virtual circuit using Ethernet framing.

set bridge dsl vccn option { on off }

Enables or disables bridging services for the specified interface. Specified interface must be part of a VLAN if bridge is turned on. Only RFC-1483 Bridged encapsulation is supported currently.

❑show log command will show that WAN Bridge is enabled when at least one WAN interface is bridged.

❑show ip interfaces and show bridge interfaces commands will show the interfaces that are not in bridged mode and that are in bridged modes, respectively.

set bridge table-timeout [ 30 ... 6000 ]

Sets the timeout value for bridging table timeout. Default = 30 secs; range = 30 secs – 6000 secs (.5– 100 mins).

152