Motorola 3397GP manual Factory Reset Switch, Series2240N, 2241N 3347-02, 2246N, 126

Administrator’s Handbook

Factory Reset Switch

Lose your password? This section shows how to reset the Motorola Netopia® Router so that you can access the configuration screens once again.

☛NOTE: Keep in mind that all of your settings will need to be reconfigured.

If you don't have a password, the only way to access the Motorola Netopia® Router is the following:

1.Referring to the following diagram, find the round Reset Switch opening.

7000-series2240N

DSL		LAN
4	3	2	1	Power

Off/On

Factory Reset Switch:	Factory Reset Switch:
Push to clear all settings
	Push to clear all settings

2241N

3347-02

DSL
4	3 LAN 2	1	Power	Off / On

	Factory Reset Switch:
Factory Reset Switch:
	Push to clear all settings
Push to clear all settings

2246N

	2247-series
		ON
	RESET	OFF
		Factory Reset Switch:
DSL	4 3 ETHERNET 2 1POWER

Push to clear all settings

Factory Reset Switch:

Push to clear all settings

2.Carefully insert the point of a pen or an unwound paperclip into the opening.

❑If you press the factory default button for less than 1/2 a second, the unit will continue to run as normal.

❑If you press the factory default button for 1 second, when you release it, the Gateway will perform a factory reset, clear all settings and configurations, and reboot. Do not hold the button down too long (5 – 10 seconds). This will destroy any saved default settings as well.

126