Entering Text
62
General Text Entry Rules
Use the keypad to enter letters, numbers, symbols, and other
characters with the tap method. Press the same key repeatedly
to cycle through available characters. (See the “Character Chart”
on page 63.)
If you do not press a key for two seconds, the character in
the block cursor is accepted, and the cursor moves to the
next position.
Press a number
key to enter text
at flashing cursor
location.
Press a number
key as many times
as necessary to
enter the desired
character.
Press and hold
a number key to
cycle between
tap method and
numeric text
entry mode.
Press left or
right navigation
keys to move
flashing cursor
to the left or
right in text
message.
Press up or
down navigation
keys to change
character in
block cursor to
uppercase or
lowercase.
Msg:
__________
__________
CANCEL M
BROWSE
|