Introduction to Batteries
Each battery is shipped in an uncharged state with a protective clip on it. Before you can use your phone, you will need to remove the clip from the battery and charge it.
Battery Clips
It is a good idea to save the protective clip to store and carry the battery when not in use. The clip prevents objects from touching the battery terminals, thereby reducing the risk of injury or damage from a short circuit.
Removing the Main Battery Clip
1.Press Hold one end of the battery/clip in one hand.
Tab | Press down on the tab at the opposite end of |
| the clip with your other hand. |
2.Remove Rotate the clip away from the battery.
Clip
2.
1.
Attaching the Main Battery Clip
1.Insert Insert one end of the battery into the clip, so
Side that the battery fits the notches on the clip.
2.Click Click the other side of the battery into place.
Latch
2.
1.
12
