Motorola manual Basic Configuration, Restarting the VT2442 see page

Overview Installation Troubleshooting Contact FAQ Glossary License

Configuration: Basic Advanced TCP/IP Wireless

Basic Configuration

The VT2442 provides a graphical user interface (GUI) to configure Ethernet, router, DHCP, and security settings. It is much easier to configure your local area network (LAN) using a VT2442 than with traditional networking equipment. For basic operation, most default settings require no modification.

The following sections describe:

•

•

•

•

•

•

Logging In to the VT2442 (see page 13)

Configuration Overview (see page 14)

Restarting the VT2442 (see page 15)

Logging Out (see page 15)

WAN Configuration (see page 16)

LAN Configuration (see page 20)

If DHCP is enabled on all of the computers on your home network (LAN), you do not need to change any of the default LAN settings. Unless you have sufficient networking knowledge, we recommend not changing any LAN settings.

For information about advanced configuration, see “Advanced Configuration” on page 22.

VT2442 Voice Gateway User Guide 12