Motorola VT2442 manual Installation, Before You Begin, Description

Overview Installation Troubleshooting Contact FAQ Glossary License

Configuration: Basic Advanced TCP/IP Wireless

Installation

To install your VT2442, you need to:

•Review “Before You Begin” on page 5 and “Precautions” on page 6

•

•

Gather Information (see page 6)

Connect the VT2442 (see page 6)

Before You Begin

Before you begin installation, check that you received the following items with your VT2442:

Item	Description
AC	Connects the VT2442 to an AC electrical outlet
adapter
Ethernet	Blue cable connects the Internet port on your VT2442 to your cable or DSL modem
cables	Yellow cable connects an Ethernet port on your VT2442 to a computer or other network
	device
Vertical mounting stand	Provides vertical mounting on a desktop or other flat surface to use less space
VT2442 Voice Gateway	Provides instructions to quickly set up and configure your voice gateway
Quick Start Guide

In addition to your VT2442 voice gateway, you also need:

•

•

•

•

An established DSL or cable Internet connection

One or two touch-tone telephones

One or more computers with these minimum requirements:

—Pentium-class processor or faster

—16 MB of memory

—10 MB of hard disk space available

—Windows® 98, Windows 98 SE, Windows Me®, Windows NT®, Windows XP™

A 10/100Base-T category 3 or better straight-through Ethernet cable with RJ-45 terminators for each computer to be wired to the network (the yellow cable provided with the voice gateway connects one computer)

If you purchased your VT2442 voice gateway from a retail location, you must first activate your Vonage® Phone Service. You will need to provide the WAN MAC ID on the bottom of the VT2442.

•In the USA, visit www.vonage.com/activate

VT2442 Voice Gateway User Guide 5