Motorola VT2442 manual IP QoS Traffic Rule fields, Field, Description

Overview Installation Troubleshooting Contact FAQ Glossary License

Configuration: Basic Advanced TCP/IP Wireless

IP QoS Traffic Rule

This window displays when you click Add on the IP QoS window. It enables you to define rules for filtering packets.

IP QoS Traffic Rule fields

Field	Description
Rule Name	The rule name
Source IP	Sets the source IP address for the rule.
Source Start Port	Sets the source start port.
Destination IP	Sets the destination IP address.
Destination Start Port	Sets the destination start port.
Packet Length Start	Sets the minimum packet size for the rule.
Protocol	Sets the protocol — TCP, UDP, ICMP, or Any.
Traffic Priority	Sets the priority for traffic matching these characteristics — High or Low.
Source Netmask	Sets the source subnet mask, which along with the Source IP specifies a range of source
	IP addresses.
Source End Port	Sets the source end port.
Destination Netmask	Sets the destination subnet mask, which along with the Destination IP specifies a range of
	destination IP addresses.
Destination End Port	Sets the destination end port.
Packet Length End	Sets the maximum packet size allowed by the rule.
Physical Port	Can be none, Port 1, Port 2, Port 3, Port 4, or WLAN.

VT2442 Voice Gateway User Guide 25