Moxa Technologies NPort 5600 user manual Serial Settings, Port alias

NPort 5600 Series User’s Manual Configuring NPort Administrator

Serial Settings

Click Serial Settings, located under Main Menu, to display serial port settings for ports 1 and 2.

NOTE: Since this figure was borrowed from the manual of NPort 5200, which has only 2 RS-232 ports, there are only 2 ports shown in this figure. Once you have completed the hardware installation of NPort 5600, there should be either 16 or 8 ports shown in the figure, depending on the model you installed. The steps for changing the settings of the other ports are the same as those for Port 1 and Port 2.

To modify serial settings for a particular port, click either Port 1 or Port 2 under Serial Settings, located under Main Menu on the left side of the browser window

Port alias

Setting	Factory Default	Necessity
1 to 15 characters	None	Optional
(E.g., PLC-No.1)

“Port Alias” is specially designed to allow easy identification of the serial devices which are connected to NPort’s serial port.

5-9