Moxa Technologies NPort 5600 user manual Server name, Time zone, Local time, Time server

NPort 5600 Series User’s Manual			Configuring NPort Administrator
	Server name
	Setting	Factory Default		Necessity
	1 to 39 characters	NP[model name]-[Port No.]_ [Serial No.]		Optional

This option is useful for specifying the location or application of different NPorts.

Time

NPort 5600 has a built-in Real-Time Clock for time calibration functions. Functions such as Auto warning “Email” or “SNMP Trap” can add real-time information to the message.

ATTENTION

First time users should select the time zone first. The Console will display the “real time” according to the time zone compared to GMT.

If you would like to modify the real time clock, select “Local time.” NPort’s firmware will modify the GMT time according to the Time Zone.

Time zone

Setting	Factory Default	Necessity
User selectable time zone	GMT (Greenwich Mean Time)	Optional
Local time
Setting	Factory Default	Necessity
User adjustable time.	GMT (Greenwich Mean Time)	Optional
(1900/1/1-2037/12/31)

Click the Modify button to open the Modify time settings window to input the correct local time.

Time server

Setting	Factory Default	Necessity
IP or Domain address	None	Optional
(E.g., 192.168.1.1 or time.stdtime.gov.tw)

NPort 5600 uses SNTP (RFC-2030) for auto time calibration.

Input the correct “Time server” IP address or domain address. Once NPort is configured with the correct Time Server address, NPort will request time information from the “Time server” every 10 minutes.

5-4