20
MultiFRAD 3000-Series User Guide
Introduction
This chapter will guide you through the installation and initial configuration of the MultiFRAD
software included in your shipping box. Chapter 4 will provide a more detailed description of the
software and it’s features.
Loading your Software
The following loading procedure does not provide every screen or option in the process of
installing the MultiFRAD software. The assumption is that a technical person is doing the
installation and that a thorough knowledge of Windows and the software loading process is
understood.
1. Run Windows on the pc connected to the Command Port.
2. Insert the MultiFRAD Disk 1 diskette into the disk drive on the PC connected to the
Command Port.
3. Win3.1 users - In Program Manager, click File I Run. In the Run dialog box, type
a:\setup.exe or b:\setup.exe (depending on the letter of your floppy disk drive) in the
Command Line field and then click OK.
Win95/98/NT users - click Start I Run. In the Run dialog type a:\setup or b:\setup
(depending on the letter of your floppy disk drive) in the Command Line field and then click
OK.
4. The Welcome screen is displayed.
Click Next to continue.
5. Follow the on-screen instructions to install your MultiFRAD 3000 software.
You can either choose the Destination Location of your MultiFRAD 3000 software or select
the default destination by clicking Next>. If you click Browse, you can select a different
destination folder for your MultiFRAD software; however, it is recommended that you accept
the default folder MF3000.