Owner’s Manual
48 MT5634ZPX-PCI
Register Unit Range Default Description
S48 decimal 7 or 128 7 The chart below lists the S36 and S48
configuration settings necessary to
negotiate certain types of connections.
S48=7 S28=128
S36=0,2 LAPM or Hangup Do not use
S36=1,3 LAPM or Async Async
S35=4,6 LAPM, MNP, or Hangup MNP or Hangup
S36=5,7 LAPM, MNP, or Async MNP or Async
S89 seconds 0, 5255 60 Sets the length of time in the off-line
command mode before the modem
goes into standby mode. A value of
zero prevents standby mode; a value
of 14 sets the value to 5.
S108 decimal 0-3, 6,7 6 Selects the digital loss if using the
modem thru a PBX line. Default
value is -6dB loss, the value used
when calling from a typical POTS
line long distance.
S109 0, 1, 2 Sets one of three 56K operating
modes: K56flex mode, V.90 mode, or
Auto-mode.
0 V.90 disabled
1 K56flex or V.90 (Dual-mode
enabled)
2 V.90 only (K56flex disabled).
Forces V.90 connections for
testing purposes, etc.