Appendix

Figure A-1. Creepage and Clearance Distances.

Except at the edge connector, which plugs into the host’s expansion slot, clearance distance (Xmm) and creepage distance (Ymm), as given in the above table, must be maintained between the communication card and any assemblies which use or generate hazardous voltage.

This apparatus has been approved for the use of the following:

Auto-calling

Loop disconnect and MF dialing

Phone number storage and retrieval by a predetermined code

Operation in the absence of proceed indication

Detection of initial and secondary proceed indication

Automatic storage of last number dialed

Tone detection-busy

Auto clear from the originating end

DTR dialing

Modem

PBX timed break register recall

MT5634ZPX-PCI

73

Page 73
Image 73
Multi-Tech Systems MT5634ZPX-PCI owner manual Figure A-1. Creepage and Clearance Distances