Technical Configuration | MultiVOIP FX User Guide |
|
|
Telephony Interface Parameters
The following parameters must be known about the PBX or telco central office equipment to which the analog MultiVOIP will connect:
Phone Parameters
Ask phone company or telecom manager.
#Telephony Interface Parameters:
Record for this VOIP Site
•Which interface type is to be used? FXS_____ FXO_____
•If FXS, determine whether the line will be used for a phone, fax, or KTS (key telephone system)
•If FXO, determine if line will be an analog PBX extension or an analog line from a telco central office
Config Info CheckList
Type of Configuration | MultiVOIP | Info | Info |
Info Gathered | Configuration | Obtained | Entered |
| screen on which | √ | √ |
| to enter the Info |
|
|
IP Info for voip unit | IP Parameters |
|
|
● IP address |
|
|
|
● Gateway |
|
|
|
● DNS IP (if used) |
|
|
|
|
|
|
|
Interface Type | Interface |
|
|
(Choices: FXS, FXO) | Parameters. |
|
|
*In FXO/FXS systems, |
|
|
|
channels used for phone, |
|
|
|
fax, or key system are |
|
|
|
FXS; channels used for |
|
|
|
analog PBX extensions or |
|
|
|
analog telco lines are |
|
|
|
FXO. |
|
|
|
|
|
|
|
Country Code | Regional |
|
|
| Parameters |
|
|
|
|
|
|
Reminder: Be sure to Save & Apply after entering configuration values. | |||
|
|
|
|
60