Multi-Tech Systems MVPFX2-2 manual Dialing Options

MultiVOIP FX User Guide				Technical Configuration
	FXO Interface: Parameter Definitions*
	Disconnect Options
	Sequence	1st tone pair	These are DTMF tone pairs
		+	constitute 2-part sequences that
		2nd tone pair	signal call disconnection.
			Values for first tone pair are:
			*, #, 0, 1-9, and A-D.
			Values for second tone pair are:
			none, 0, 1-9, A-D, *, and #.
			The tone pairs 1-9, 0, *, and #
			are the standard DTMF pairs
			found on phone sets. The tone
			pairs A-D are “extended
			DTMF” tones, which are used
			for various PBX functions.
	Silence	Y/N	Enables/disables silence-
	Detection		detection method of
			supervising call disconnection.
	Type (of	One-Way or	Disconnection to be triggered
	Silence	Two-Way	by silence in one direction only
	Detection)		or in both directions
			simultaneously.
	Timer (for	integer values,	Duration of silence required to
	Silence	in seconds	trigger disconnection.
	Detection)
	Dialing Options
	Regeneration	Pulse, DTMF	Determines whether digits
			generated and sent out will be
			pulse tones or DTMF.
	Inter Digit	1 to 10 seconds	This is the length of time that
	Timer		the MultiVOIP will wait
			between digits. When the time
			expires, the MultiVOIP will
			look in the phonebook for the
			number entered.
			Default = 2.
	Inter Digit	50 to 20,000	The length of time between the
	Regeneration	milliseconds	outputting of DTMF digits.
	Time		Default = 100 ms.

85