Multi-Tech Systems MVPFX2-2 manual Caller ID fields

MultiVOIP FX User Guide Technical Configuration

FXO Interface: Parameter Definitions*

Field Name	Values	Description
Select Channel	1-2 (MVPFX2-2);	Indicates the voip channel to
	1-4 (MVPFX2-4);	which parameter values will be
	1-8 (MVPFX2-8)	assigned.
Interface Type	FXO	Enables FXO functionality.
Caller ID fields
Type	Bellcore	The MultiVOIP currently
		supports only one
		implementation of Caller ID.
		That implementation is Bellcore
		type 1 with Caller ID placed
		between the first and second
		rings of the call.
Enable	Y/N	Caller ID information is a
		description of the remote
		calling party received by the
		called party. The description
		has three parts: name of caller,
		phone number of caller, and
		time of call. The ‘time-of-call’
		portion is always generated by
		the receiving MultiVOIP unit
		(on FXS channel) based on its
		date and time setup.
		In general, the forms of the
		‘Caller Name’ and ‘Caller
		Phone Number’ differ
		depending on the IP
		transmission protocol used and
		upon entries in the phonebook
		screens of the remote (CID
		generating) voip unit. For
		MVPFX2 units, only the SIP-
		related Caller ID options are
		available. The CID Name and
		Number appearing on the
		phone at the terminating FXS
		end will come either from a
		central office switch (showing a
		PSTN phone number), or the
		phonebook of the remote (CID
		sending) voip unit.

83