Technical Configuration

MultiVOIP FX User Guide

 

 

Operation of MultiVOIP through web GUI requires up-to-date version of Java. If Java has not yet been installed, follow these instructions:

A.Install up-to-date Java program from MultiVOIP product CD (on first use only).

B.Open web browser.

C.Browse to IP address of MultiVOIP unit.

D.If username and password have been established, enter them when when prompted.

E.Set browser to allow pop-ups. The MultiVOIP Web GUI makes extensive use of pop-up windows to access screens and commands.

3.Confirm Connection. When the PC is in communication with the MultiVOIP through the web browser, you will see an icon for each voip channel in the lower left corner of the screen. The icon is green when the channel is in use and red when idle.

4.Configuration Parameter Groups: Getting Familiar, Learning About Access. The first part of configuration concerns IP parameters, Voice/FAX parameters, Telephony Interface parameters, Call Signaling parameters, Regional parameters, Logs/Traces, System Information, and Packetization Time. In the MultiVOIP software, these eight types of parameters are grouped together under “Configuration” and each has its own dialog box for entering and viewing values.

To access the dialog box for these parameter groups, click on the name of the parameter group in the sidebar menu of the browser.

62

Page 62
Image 62
Multi-Tech Systems MVPFX2-2 manual Technical Configuration MultiVOIP FX User Guide