N-Tron 9000 Series user manual 17/2007 107

Get Flow Control

Command Name	port get flowcontrol
Description	Displays the current flow control settings on a given port.
Syntax	port get flowcontrol <port-no>
Parameters	port-no
	port number (1 ~ 24)
Examples	N-TRON/Admin#[1]> port get flowcontrol 6
NOTES	Check whether port-nois in the valid range. (1 ~ 24)
Get Name
Command Name	port get name
Description	Displays the name of a given port.
Syntax	port get name <port-no>
Parameters	port-no
	port number (1 ~ 26)
Examples	N-TRON/Admin#[1]> port get name 6
NOTES	Check whether port-nois in the valid range. (1 ~ 26)
Get State Of Priority
Command Name	port get stateofpriority
Description	Displays the priority state of a given port number.
Syntax	port get stateofpriority <port-no>
Parameters	port-no
	port number (1 ~ 26)
Examples	N-TRON/Admin#[1]> port get stateofpriority 6
	Priority State of Port[6] is : [disabled]
NOTES	Check whether port-nois in the valid range. (1 ~ 26)
Get Intruder State
Command Name	port get intruderstate
Description	Displays whether the intruder log is enabled or disabled.
Syntax	port get intruderstate
Parameters	None
Examples	N-TRON/Admin#[1]> port get intruderstate
	Intruder Log : Disabled
NOTES
Get Priority Level
Command Name	port get prioritylevel
Description	Displays the priority level on a given port.
Syntax	port get prioritylevel <port-no>
Parameters	port-no
	port number (1 ~ 26)
Examples	N-TRON/Admin#[1]> port get prioritylevel 6
	Priority Level of Port[6] is : [1]
NOTES	Check whether port-nois in the valid range. (1 ~ 26)
Get STP Status
Command Name	port get STP Status
Description	Displays the Spanning Tree Protocol Status on a given port.
Syntax	port get stpstatus <port-no>
Parameters	port-no
	port number (1 ~ 26)
Examples	N-TRON/Admin#[1]> port get stpstatus 6
	Stp state of [6] port is : [Forward]
NOTES	STP states include: Listening, Learning, Blocking, & Forwarding
Get Back Pressure
Command Name	port get backpressure
5/17/2007	page 107 of 138