N-Tron 9000 Series user manual 17/2007 124, Ring get mode, Ring set mode

N-Ring get mode

Command Name	n-ring get mode
Description	To display the current N-Ring Mode.
Syntax	n-ring get mode
Parameters	None
Example	N-TRON/Admin#[1]> n-ring get mode
	N-Ring Mode : AutoMember
NOTES
N-Ring set mode
Command Name	n-ring set mode
Description	Sets the current N-Ring Mode, and ring ports if manager mode.
Syntax	n-ring set mode <managerautomemberdisable> [-rp <AE>]
Parameters	mode, and if mode=manager then –rp (ring ports)
Examples	N-Ring Mode set to automember
	................
	................
	.
	Device is Going for Reboot....
	N-TRON/Admin#[3]> n-ring set mode manager -rp A
	N-Ring Mode set to manager
	Port Set to be used is Slot A
	................
	................
	.
	Device is Going for Reboot....
NOTES	NOTE: N-Ring Manager cannot have RSTP or Trunking enabled.

5/17/2007 page 124 of 138