N-Tron 9000 Series user manual Igmp Related Commands, 17/2007 119

IGMP Related Commands

Enable IGMP

Command Name	igmp set enable
Description	The igmp status is made to enable .
Syntax	igmp set enable
Parameters	None
Examples	N-TRON/Admin#[1]> igmp set enable
	igmp status is Enabled
	N-TRON/Admin#[2]> igmp show config
	Igmp		: Enabled
	Query Mode		: auto
	Router Mode		: auto
	Router Ports (Manual)		:
NOTES	The status can be viewed through the igmp show config command
Disable IGMP
Command Name	igmp set disable
Description	The igmp status is made to disable
Syntax	igmp set disable
Parameters	None
Examples	N-TRON/Admin#[1]> igmp set disable
	igmp status is Disabled
	N-TRON/Admin#[2]> igmp show config
	Igmp		: Disabled
	Querier		: Enabled
	Query Mode		: auto
	Router Mode		: auto
	Router Ports (Manual)		:
NOTES	The status can be viewed through the igmp show config command
Show IGMP config
Command Name	igmp show config
Description	The igmp configuration is displayed
Syntax	igmp show config
Parameters	None
Examples	N-TRON/Admin#[1]> igmp show config
	Igmp		: Disabled
	Querier		: Enabled
	Query Mode		: auto
	Router Mode		: auto
	Router Ports (Manual)		:
NOTES	This command is used to see the config previously set by the user
Show IGMP group
Command Name	igmp show group
Description	The igmp show group command is used to display the groups present in the
	group list
Syntax	igmp show group
Parameters	None
Examples	N-TRON/Admin#[1]> igmp show group
	GroupIp	PortNo	VlanID
	---------------------------------------
	224.0.0.2	6	1
	224.0.1.24	6	1
NOTES	The group display is used to check that the group ip, port no & vlan id were
	received correctly.

5/17/2007 page 119 of 138