N-Tron 9000 Series user manual Rapid Spanning Tree Protocol Related Commands, 17/2007 127

Rapid Spanning Tree Protocol Related Commands

Set RSTP Admin Edge

Command Name	rstp set adminedge
Description	Sets the Adminedge value of a port in a Vlan.
Syntax	rstp set adminedge <vlan id> <port no> <status>
Parameters	vlan id
	Vlan Id containing the port for which the adminedge is to be set.
	port no
	Port number in the Vlan to be set.
	status
	Status of the adminedge of the port to be set.
	Values of “enable” and “disable” are valid
Examples	N-TRON/Admin#[1]> rstp set adminedge 1 1 disable
	N-TRON/Admin#[2]> rstp set adminedge 2 2 enable
NOTES
Get RSTP Admin Edge
Command Name	rstp get adminedge
Description	Gets the Adminedge value of the given port in the given Vlan-Id.
Syntax	rstp get adminedge <vlan id> <port>
Parameters	vlan id
	Vlan Id containing the port for which the adminedge is to be viewed .
	port
	Port for which the adminedge value is to be viewed .
Examples	N-TRON/Admin#[1]> rstp get adminedge 1 1
	N-TRON/Admin#[2]> rstp get adminedge 2 2
NOTES
Set RSTP Auto Edge
Command Name	rstp set autoedge
Description	Sets the Autoedge value of a port in a Vlan.
Syntax	rstp set autoedge <vlan id> <port-no> <status>
Parameters	vlan id
	Vlan Id containing the port for which the autoedge is to be set.
	port-no
	Port number in the Vlan to be set.
	status
	Status of the autoedge of the port to be set.
	Values of “enable” and “disable” are valid
Examples	N-TRON/Admin#[1]> rstp set autoedge 1 1 disable
	N-TRON/Admin#[2]> rstp set autoedge 2 2 enable
NOTES
Get RSTP Auto Edge
Command Name	rstp get autoedge
Description	Gets the Autoedge value of the given port in the given Vlan-Id.
Syntax	rstp get autoedge <vlan id > <port>
Parameters	vlan id
	Vlan Id containing the port for which the autoedge is to be viewed .
	port
	Port for which the autoedge value is to be viewed .
Examples	N-TRON/Admin#[1]> rstp get autoedge 1 1
	N-TRON/Admin#[2]> rstp get autoedge 2 2
NOTES

5/17/2007 page 127 of 138