N-Tron 9000 Series Set System Location, Get System Uptime, Set IP Address of the Snmp Manager

Set System Location

Command Name	system set syslocation
Description	To set the location details of the system
Syntax	system set syslocation	<Location-of-the-system>
Parameters	Location-of-the-system
	The details of where the system is located
Example	N-TRON/Admin#[1]> system set syslocation “San Jose”
	N-TRON/Admin#[2]> system set syslocation Hyderabad
Notes	Please ensure to use “ “ for supplying arguments with spaces
Get System Uptime
Command Name	system get sysuptime
Description	To get the uptime of the device.
Syntax	system get sysuptime
Parameters	None
Example	N-TRON/Admin#[1]>	system get sysuptime
	System Up Time	: 9 days:17 hours:8 mins:40 secs
Notes
Get Number of Ports present in the System
Command Name	system get portcount
Description	To get the number of ports present in the device.
Syntax	system get portcount
Parameters	None
Example	N-TRON/Admin#[1]> system get portcount
Notes
Set IP Address of the SNMP Manager
Command Name	system set snmpmgmtip
Description	To set the IP address of the SNMP manager
Syntax	system set snmpmgmtip <IP-address>
Parameters	IP Address
	The IP address of the SNMP manager in dotted decimal notation
Example	N-TRON/Admin#[1]> system set snmpmgmtip 10.1.5.100
	N-TRON/Admin#[2]> system set snmpmgmtip 10.1.6.150
NOTES	The IP address should be a valid IP address (excluding Class D & Class
	E type). To restore a Trap to “Value Not Configured”, en ter ‘0.0.0.0’.
Set SNMP Get Community name
Command Name	system set snmpgetcommunity
Description	To set the community name for performing snmpget operation
Syntax	system set snmpgetcommunity <Community-Name>
Parameters	Community-Name
	The name of the community to be used for performing snmpget
	operation
Example	N-TRON/Admin#[1]> system set snmpgetcommunity public
	N-TRON/Admin#[1]> system set snmpgetcommunity “N-Tron
	Systems”
Notes	Please ensure to use “ “ for supplying arguments with spaces

5/17/2007 page 94 of 138