N-Tron 9000 Series user manual 17/2007 131, Set Rstp Port Priority, Get Rstp Port Priority

Set RSTP Port Priority

Command Name	rstp set portpriority
Description	To set the priority of the port for a given port in the given vlan-id. STP and
	RSTP use the port priority to determine which port to place into forwarding
	mode when there are 2 or more ports to choose from.
Syntax	rstp set portpriority <vlan-id> <port no> <port priority>
Parameters	vlan-id
	Vlan Id to which the port belongs.
	port no
	The portnumber for which the port priority is to be set.
	port priority
	The Port priority value to be set.
	The valid port priority is 0-255.
Examples	N-TRON/Admin#[1]> rstp set portpriority 1 4 100
	N-TRON/Admin#[2]> rstp set portpriority 2 6 50
NOTES	Please supply a valid Vlan Index (being greater than zero)and Port Number.
	If the port priority is the same on both ports then the switch will resort to
	the path cost to determine the best path.
Get RSTP Port Priority
Command Name	rstp get portpriority
Description	To get the priority of the port for a given port in the given vlan-id
Syntax	rstp get portpriority <vlan-id> <port no>
Parameters	vlan-id
	Vlan Id to which the port belongs.
	port no
	The portnumber for which the port priority is to be set.
Examples	N-TRON/Admin#[1]> rstp get portpriority 1 4
	N-TRON/Admin#[2]> rstp get portpriority 2 6
NOTES	Please supply a valid Vlan Index (being greater than zero)and Port Number

5/17/2007 page 131 of 138