N-Tron 9000 Series 17/2007 120, Show Igmp router, Set Igmp query mode, Set Igmp router port

Show IGMP router

Command Name	igmp show router
Description	The igmp show router command is used to display the auto-detected routers
	at present.
Syntax	igmp show router
Parameters	None
Examples	N-TRON/Admin#[1]> igmp show router
	RouterIp	PortNo
	------------------------
	192.168.1.150	5
NOTES	The router display is used to check that the router ip & port number was
	received correctly.
Set IGMP query mode
Command Name	igmp set qmode
Description	Set the query mode of the switch to either on, off, or automatic.
Syntax	igmp set qmode <off on auto>
Parameters	off on auto
	There are three different query modes; off, on, and auto.
Examples	N-TRON/Admin#[1]> igmp set qmode auto
NOTES	Default: Auto
Set IGMP router port
Command Name	igmp set rtrport
Description	Enable or disable a router port based on a port-range.
Syntax	igmp set rtrport <port-range> <enable disable>
Parameters	port-range
	enter a range of port numbers.
	enable disable
	enable or disable the router port.
Examples	N-TRON/Admin#[1]> igmp set rtrport 1-4 enable
NOTES
Set IGMP router mode
Command Name	igmp set rtrmode
Description	The igmp show router command is used to display the router group present
	in the group list
Syntax	igmp set rtrmode <none manual auto>
Parameters	none manual auto
	There are three different router modes available; none, manual, and
	auto.
Examples	N-TRON/Admin#[1]> igmp set rtrmode auto
NOTES	Default: Auto

5/17/2007 page 120 of 138