N-Tron 9000 Series 17/2007 128, Set Rstp Bridge Admin Status, Get Rstp Bridge Admin Status

Set RSTP Bridge Admin Status

Command Name	rstp set bridgeadminstatus
Description	Sets the Bridge Admin Status of the given Vlan-ID.
Syntax	rstp set bridgeadminstatus <vlan id > <bridge adminstatus >
Parameters	vlan id
	Vlan Id for which the priority to be set.
	bridge adminstatus
	Status of the Bridge to be set.
	Values of “fast”, “forcestp” and “disable” are valid
Examples	N-TRON/Admin#[1]> rstp set bridgeadminstatus 1 disable
	N-TRON/Admin#[2]> rstp set bridgeadminstatus 2 fast
NOTES
Get RSTP Bridge Admin Status
Command Name	rstp get bridgeadminstatus
Description	Gets the Bridge Admin Status of the given Vlan-Id.
Syntax	rstp get bridgeadminstatus <vlan-id >
Parameters	vlan-id
	Vlan Id for which the admin status is to be viewed .
Examples	N-TRON/Admin#[1]> rstp get bridgeadminstatus 1
	N-TRON/Admin#[2]> rstp get bridgeadminstatus 2
NOTES
Set RSTP Bridge Forward Delay
Command Name	rstp set bridgeforwarddelay
Description	To set the forward delay time for a given Vlan-Id. Forward Delay in STP
	is the time a switch waits after connecting to a root bridge, before he
	changes the port state to forwarding from the listening and learning states.
	RSTP only uses this as a backup feature for legacy STP device support.
Syntax	rstp set bridgeforwarddelay <vlan-id > <forwarddelay >
Parameters	vlan-id
	Vlan Id for which the forward delay time to be set.
	forwardelay
	Forward delay Time to be set. The valid range of the Forward delay
	time is (4.0 – 30.0) secs.
Examples	N-TRON/Admin#[1]> rstp set bridgeforwarddelay 1 6
	N-TRON/Admin#[2]> rstp set bridgeforwarddelay 2 10
NOTES	Please ensure that the forwarddelay time and vlan id values are valid. STP
	switches can take up to 2x this figure before both the root switch and the
	STP switch changes the port modes into forwarding states.
Get RSTP Bridge Forward Delay
Command Name	rstp get bridgeforwarddelay
Description	To get the Forward Delay Time of a given Vlan Id.
Syntax	rstp get bridgeforwarddelay <vlan-id>
Parameters	vlan-id
	Vlan Id for which the forward delay time is to be viewed.
Examples	N-TRON/Admin#[1]> rstp get bridge forwarddelay 1
	N-TRON/Admin#[2]> rstp get bridge forwarddelay 2
NOTES	Please supply a valid Vlan Index ( being greater than zero)

5/17/2007 page 128 of 138