Napoleon Fireplaces GDS28P manual 4.3APPLIANCE VENT CONNECTION, High Temperature Sealant

24

4.3APPLIANCE VENT CONNECTION

A.Attach the adjustable pipe to the last section of rigid pipe. Secure with screws and seal.

B.Install the inner flex pipe to the appliance. Secure with 3 screws and flat washers. Seal the joint and screw holes using the high temperature sealant W573-0007 (not supplied).

C.Run a bead of high temperature sealant (not supplied) around the inside of the air intake collar. Pull the adjustable pipe a minimum 2” into the air intake collar.

#8 X 1/2”

SELF DRILLING

SCREWS 2” OVERLAP

HIGH TEMPERATURE

SEALANT

NOTE: Ensure that the sealant is not visible on the exterior pipes once installation is completed. An optional decorative black band is available for this use. In the event that the venting must be disassembled, care must be taken to reseal the venting.

28.3

4.4MOBILE HOME INSTALLATION - MODEL GDS28

In Canada, mobile home installation may be vented horizontally or vertically. In the United States, it may only be installed vertically. See "VERTICAL VENTING" or "HORIZONTAL AIR TERMINAL INSTALLATION" section for installation.

For mobile home installations, the appliance must be fastened in place. It is recommended that the appliance be secured in all installations. Use the levelling / securing kit, GDSLL-KT for this purpose.

W415-0153 / B / 06.10.10