Chapter4 GPIBConfiguration
GPIB-ENET/100for Mac OS 4-2 ni.com
Figure4-1. EthernetSettings in NI-488 Config
3. Tochoose a GPIB bus to use with your GPIB-ENET/100, check one of
the busselection boxes at the top of the screen. There are no
restrictions on which box you should check. NI-488 Config displays
thenumber of the next available GPIB bus below the bus selection box
you selected. In Figure 4-1, NI-488 Config determined that GPIB
bus0 is available for the GPIB-ENET/100.
4. Click the Bus/Device menu. From the listbox that appears, select the
bus NI-488 Configwants you to use to associate the GPIB bus with
your box. The configuration in Figure 4-1 showsgpib0.
5. Entert he hostname or IP address of your GPIB-ENET/100 in the
IPAddress edit box that appears belowthe ENET Connections
slider.The configuration in Figure 4-1 shows gpib0 linked to the
GPIB-ENET/100 at static IP address 128.164.28.39.
IfD HCP configuredth enet workpar ameters, enter the hostname
the GPIB-ENET/100 is using. Use the default hostname listed on
the baseplate label unless you changed the hostname using the
NI Ethernet Device Configuration utility.
If DHCP did not configurethe network parameters, enter the static
IPaddress you configured for your GPIB-ENET/100 using the
NI Ethernet Device Configuration utility.