NCR RealScan 7883 Installation and Owner Guide
Connecting Sensormatic Components
1.Position the Deactivation Brick on top of the Bridge Plate as shown under Configuring the Scale. The cable from the Deactivation Brick must be routed from the bottom of the brick toward the center of the Bridge Plate.
Deactivation Brick Cable
20214
2.Connect the cables to the Controller Box. (New cable to Sensormatic and new Sensormatic Box See Don or Dan)
Deactivation | Key Switch | Interlock Cable - |
Brick Cable | Alarm Box Cable | From Scanner |
20215
44 of 75 | 04/04 |
