2.2.3 Switch Setting of DAIC Card
Refer to Chapter 3, Section 2.1.3.
2.2.4 Mounting of DAIC Card
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
STEP 1: Set MB switch on DAIC card to up position.
STEP 2: Mount DAIC card in the AP slot on the Remote PIM.
A maximum of two DAIC cards can be mounted.
After mounting the card, set MB switch to down position.
STEP 3: After mounting all DAIC cards, set MB switch on DAIB card to up, and then down.
•Small Platform
Remote PIM
LT00
LT01
LT02
LT03
LT04
LT05
LT06/AP00 | LT07/AP01 | LT08/AP02 | LT09/AP03 | LT10/AP04 | AP05 | MP |
P
W R
DAIC CARD
Figure 3-17 Mounting Location of DAIC Card (Remote PIM)
ND-46550 (E)CHAPTER 3
Page 41
