NEC 151944 system manual RMT PCM-0.3 CA

Table 2-2 Required Equipment (Continued)
EQUIPMENT NAME	DESCRIPTION
PN-DAIC (DAIC Card)	Digital Interface Channel Expansion Card.
	This card provides the 1.5Mbps (24 channel) digital interface.
	1 through 6 DAIC cards can be provided at main site.
	In Remote PIM, 2 DAIC cards can be provided.
	Small Platform PIM: up to 64 line/trunks can be accommodated.
	1000 IVS PIM: up to 47 line/trunks can be accommodated.
PN-BS00/BS01 (BUS interface Card)	BUS interface cards for PIM0 or PIM1 through PIM7
	For Remote PIM System, BS00 card is required at the main site, even if
	the system is 1-PIM configuration.
PN-CP01 (FP Card)	Firmware processor card
	For Remote PIM System, CP01 card must be mounted on PIM0 at the
	main site, even if the system is 1-PIM configuration.
RMT PCM-0.3 CA	1 ft. (30 cm) PCM signal cable
	This cable is used for connection between DAIA card and BUS interface
	card.
17-TW-0.3 CONN CA-A	1 ft. (30 cm) connection cable between DAIA cards
	This cable is required when plural DAIA cards are mounted in a PIM at
	the main site.
48-TW-0.2 CONN CA	1ft. (30 cm) connection cable.
	This cable is used for connecting between DAIA card and DAIC card or
	DAIB card and DAIC card.

ND-46550 (E)CHAPTER 2

Page 7

Revision 2.0