6.InstallFix the console panel on the front side of the rack with attached screw A (four screws).

Console panel

Front side of the rack

7.Fix the rear panel on the rear side of the rack with attached screw A (four screws).

Rear panel

Rear side of the rack

8.Connect the console panel connection cable connected to the bottom at the rear side to the console panel.

9.Put the attached cable clamp at any location of the back side of the server switch unit and then fix the operation panel connection cable so that it may not be loosen.

Important: When the cable is fixed, note that excess tension may not be applied to the connector.

Notice

Adjust the cable length using the cable clamp.

Console panel connection cable

This portion should not be slackened.

- 47 -

Page 76
Image 76
NEC N8191-09 manual Console panel Front side of the rack