Page 25
Image 25
Observe the following notes for successful operation of the server switch unit. Use of the server switch unit ignoring the notes will cause malfunctions or failures of the unit.
Make sure to power off the server switch unit and disconnect the AC cord from the power outlet before connecting or disconnecting cables.
Check to see that the Server Online lamp goes off and unplug the power cord from the outlet before relocating the server switch unit.
Clean the server switch unit on a regular basis (see Chapter 3). Regular cleaning proactively prevents various failures of the unit.
Lightning may cause a momentary voltage drop. To prevent this problem, it is recommended to use an uninterruptible power supply.
Use the keyboard and mouse which you purchased as components in the NEC Express5800 server system to connect them with the server switch unit. Using any other unauthorized keyboard and mouse cause failures of the unit as well as a malfunction of the unit.
Do not press two or more switches simultaneously. Doing so may cause a malfunction of the unit.
Use only the AC cord that comes with the server switch unit. Use of an unauthorized AC cord may cause a failure of the unit or a fire when the voltage exceeding the rated one is applied to the unit.
Use NEC's genuine interface cables for options. Repair of the unit due to a failure or damage resulted from use of a
- xix -