NEC N8191-09 manual Connecting with Eight or Less Servers, Name, Part Number, Remarks

Connecting with Eight or Less Servers

Connect the cables to the server switch unit in the following procedure. (The figure below shows an example of the server switch unit installed in the rack with eight servers connected.)

1.Connect the keyboard/mouse connector and display connector of the first server through the dedicated cable (K410-118 or K410-119). First connect the cable to the connector on the server switch unit. (Connect in the order of ￿ and ￿.)

It is recommended to attach the Device ID Label to the cable with destination device name filled in. It is useful when relocating or cleaning the unit.

Tips

Use the dedicated cables listed below to connect the server switch unit with the server.

Name	Part Number	Remarks
Server switch unit USB	K410-118(1A)	Used to connect the server to the server
connection cable set (1.8		switch unit via USB connection.
m)
Server switch unit USB	K410-118(03)	Used to connect the server to the server
connection cable set (3.0		switch unit via USB connection.
m)
Server switch unit USB	K410-118(05)	Used to connect the server to the server
connection cable set (5.0		switch unit via USB connection.
m)
Server switch unit PS/2	K410-119(1A)	Used to connect the server to the server
connection cable set (1.8		switch unit via PS/2 connection. Always
m)		use this cable between master and slave
		sides in cascade connection.
Server switch unit PS/2	K410-119(03)	Used to connect the server to the server
connection cable set (3.0		switch unit via PS/2 connection.
m)
Server switch unit PS/2	K410-119(05)	Used to connect the server to the server
connection cable set (5.0		switch unit via PS/2 connection.
m)

- 50 -