3.NAMES AND ROLES OF SECTIONS
This chapter describes the names and functions of the sections in the additional disk enclosure.
3.1Disk Enclosure (Front)
(1) POWER LED |
| (2) SERVICE LED |
|
|
|
A front mask is installed on the front face of the additional disk enclosure as shown in the figure above.
The front mask can be removed by releasing the lock with the accessory key and pulling out toward you with your hands hooked on the both sides of the mask.
Removing the front mask, you can view the disk drives shown in the figure below.
(6) Ejector |
|
|
| (1) POWER LED |
| (2) SERVICE LED | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(5) HDD FAULT LED | (4) HDD READY LED | (3) Disk drives/dummy trays |
|
|
|
(1)POWER LED (green)
The POWER LED is lit green if the AC power is supplied and the power switch is set to ON. The LED is off if the power switch is set to OFF.
-8 -
