- 27 -
6. ADDITION OF OPTIONAL DEVICES 6.1 Addition of Disk Drive
CAUTION
Do not store the product in an area where the temperature ma y increase
extremely or the difference between the warm and cold states is
considerably large. In addition, do not store the product in an area with
much moisture or dust.
Note that foreign substances such as water and metal may not be ent ered
into the product during storage. Failure to follow it may cause device
failure, electric shock, and/or fire to occur.
Keep the product into the package during storage or shipm ent.
The additional disk enclosure is not normally equipped with disk drives. Before using the
additional disk enclosure, install disk drives sold separately in the additional disk
enclosure. (The additional disk enclosure can be equipped with up to 15 disk drives.
Product name Part number Capacity
Additional disk drive NF2300-SM412E 36GB / 10,000 rpm
Additional disk drive NF2300-SM413E 73GB / 10,000 rpm
Additional disk drive NF2300-SM414E 147GB / 10,000 rpm
Additional disk drive NF2300-SM422E 36GB / 15,000 rpm
If an additional disk drive and standard disk drive ar e reassigned to the
same logical disk, all the current data is initialized.
Be sure to make backup copies of necessary data before performing the
addition procedure.
To use additional disk drives for expansion, install them sequential ly from
left to right of the disk enclosure.
An additional disk drive can also be used as a disk driv e for a spare disk.
In this case, be sure to install the additional disk drive in slot 14 of the disk
enclosure. If slot 14 alrea dy contains a disk drive for a spare disk, install
the additional disk drive in slot 13.